top of page

KGE RANGE

System characteristics

The KGE is a self-priming centrifugal pump with radial (semi-open or closed) impeller, overhung mounted on a bearing pedestal. If a spacer type coupling is used, the pump can easily be dismantled without it being necessary to disturb the pipings or to move the motor.

 

The KGE series is available in different drive possibilities:


KGE: pump with bare shaft for clockwise rotation
KGEL: pump with bare shaft for counter-clockwise rotation
KGEF: pump with flanged motor (close coupled)

Applications

The KGE is suitable for clean and polluted liquids, which are non-corrosive to cast iron, including water, oils, petrol and all kind of chemicals. Draining building excavations, emptying ponds, ditches and swimmingpools, water extraction for irrigation and watering, aboard ships as bilge, deck wash and general service pumps. Emptying pits and throughs containing wastewater, handling fuels, condensate extraction pumps.

Technical Data

Maximum Capacity: 100 m3/hr

Maximum Delivery Head: 60 m

Maximum Liquid Temperature: 95DegC

Maximum Speed: 3600 rpm

Maximum Operating Pressure: 8 bar (800 kPa) (depending on pump size/materials)

Screenshot 2024-05-06 at 12.12_edited.jp
Screenshot 2024-05-06 at 12.15_edited.jp

Self Priming Centrifugal Pump according to En 733 (Din 2455)

Screenshot 2024-04-29 at 09_edited_edited.png
bottom of page